|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Previous Datasheet Index Next Data Sheet Bulletin I2088/A SD2000C..L SERIES STANDARD RECOVERY DIODES Hockey Puk Version Features Wide current range High voltage ratings up to 1000V High surge current capabilities Diffused junction Hockey Puk version Case style DO-200AB (B-PUK) 2100A Typical Applications Converters Power supplies High power drives Auxiliary system supplies for traction applications case style DO-200AB (B-PUK) Major Ratings and Characteristics Parameters IF(AV) @ Ths IF(RMS) @ Ths IFSM @ 50Hz @ 60Hz I2t @ 50Hz @ 60Hz VRRM range TJ SD2000C..L 2100 55 3900 25 23900 25000 2857 2608 400 to 1000 - 40 to 180 Units A C A C A A KA2s KA2s V C To Order Previous Datasheet SD2000C..L Series ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 04 SD2000C..L 08 10 Index Next Data Sheet VRRM , maximum repetitive peak reverse voltage V 400 800 1000 VRSM , maximum nonrepetitive peak rev. voltage V 500 900 1100 IRRM max. @ TJ = 180C mA 60 Forward Conduction Parameter I F(AV) Max. average forward current @ Heatsink temperature I F(RMS) Max. RMS forward current I FSM Max. peak, one-cycle forward, non-repetitive surge current SD2000C..L 2100 (1040) 55 (85) 3900 23900 25000 20100 21000 Units A C A Conditions 180 conduction, half sine wave Double side (single side) cooled @ 25C heatsink temperature double side cooled t = 10ms t = 8.3ms No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal halfwave, Initial TJ = TJ max. A t = 10ms t = 8.3ms t = 10ms It 2 Maximum I t for fusing 2 2857 2608 2020 1844 KA2s t = 8.3ms t = 10ms t = 8.3ms I 2 t Maximum I2t for fusing voltage 28570 0.74 KA2s t = 0.1 to 10ms, no voltage reapplied (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. V F(TO)1 Low level value of threshold V F(TO)2 High level value of threshold voltage r f1 r f2 V FM Low level value of forward slope resistance High level value of forward slope resistance Max. forward voltage drop V 0.86 0.13 m 0.12 1.55 V (I > x IF(AV)),TJ = TJ max. Ipk= 6000A, TJ = TJ max, tp = 10ms sinusoidal wave (I > x IF(AV)),TJ = TJ max. (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. To Order Previous Datasheet Index Next Data SheetSeries SD2000C..L Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current To Order Fig. 8 - Maximum Non-Repetitive Surge Current Previous Datasheet SD2000C..L Series Index Next Data Sheet Fig. 9 - Forward Voltage Drop Characteristics Fig. 10 - Thermal Impedance ZthJ-hs Characteristics To Order Previous Datasheet Thermal and Mechanical Specifications Parameter TJ Tstg Max. junction operating temperature range Max. storage temperature range Index Next Data Sheet SD2000C..L Series SD2000C..L -40 to 180 -55 to 200 0.073 0.031 14700 (1500) Units C Conditions RthJ-hs Max. thermal resistance, junction to heatsink F Mounting force, 10% K/W N (Kg) g DC operation single side cooled DC operation double side cooled wt Approximate weight Case style 255 DO-200AB(B-PUK) See Outline Table RthJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Conduction angle 180 120 90 60 30 Sinusoidal conduction Single Side Double Side 0.009 0.011 0.014 0.020 0.036 0.009 0.011 0.014 0.020 0.036 Rectangular conduction Single Side Double Side 0.006 0.011 0.015 0.021 0.036 0.006 0.011 0.015 0.021 0.036 Units Conditions K/W TJ = TJ max. Ordering Information Table Device Code SD 200 1 2 0 3 C 4 10 5 L 6 1 2 3 4 5 6 - Diode Essential part number 0 = Standard recovery C = Ceramic Puk Voltage code: Code x 100 = VRRM (see Voltage Ratings Table) L = Puk Case DO-200AB (B-PUK) To Order Previous Datasheet SD2000C..L Series Outline Table Index Next Data Sheet 3.5(0.14) DIA. NOM. x 1.8(0.07) DEEP MIN. BOTH ENDS 58 .5 (2 .3 0 ) DIA . M AX . Case Style DO-200AB (B-PUK) 0.8 (0.03) BOTH ENDS 34 (1.34) DIA. MAX. TWO PLACES All dimensions in millimeters (inches) 26 .9 (1 .06 ) 25 .4 (1 ) 53 (2.09) DIA. MAX. Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics To Order |
Price & Availability of SD2000C |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |